PSF to TSF
Convert pounds per square foot into tons per square foot for gauges, specs, hydraulic notes, and pressure reference checks.
Quick Convert
Recent Conversions
Conversion Formula
Conversion Examples
PSF to TSF Table
| Pounds per Square Foot | Tons per Square Foot |
|---|---|
| 1 | 0.0005 |
| 5 | 0.0025 |
| 10 | 0.005 |
| 25 | 0.0125 |
| 50 | 0.025 |
| 100 | 0.05 |
| 250 | 0.125 |
| 500 | 0.25 |
| 1,000 | 0.5 |
| 2,500 | 1.25 |
Popular Conversions
- 1 pounds per square foot = 0.0005 tons per square foot
- 5 pounds per square foot = 0.0025 tons per square foot
- 10 pounds per square foot = 0.005 tons per square foot
- 25 pounds per square foot = 0.0125 tons per square foot
- 50 pounds per square foot = 0.025 tons per square foot
- 100 pounds per square foot = 0.05 tons per square foot
- 250 pounds per square foot = 0.125 tons per square foot
- 500 pounds per square foot = 0.25 tons per square foot
What is Pounds per Square Foot and Tons per Square Foot?
Pounds per Square Foot
Definition: Pounds per square foot express pressure or distributed load over one square foot.
History/origin: It grew from construction and HVAC practice in customary units.
Current use: PSF is used in airflow, building loads, roofing, and low-pressure calculations.
Tons per Square Foot
Definition: Tons per square foot express pressure or bearing load over one square foot.
History/origin: It became common in geotechnical and structural work where site loads were large.
Current use: TSF is used in soil bearing, foundation notes, and heavy-load summaries.
Related Pressure Conversions
Pressure values are commonly translated across SI, customary, and fluid-column units in the same job.
| Related Conversion | Factor or Rule | Formula |
|---|---|---|
| mmHg to kPa | × 0.133322387 | kPa = mmHg × 0.133322387 |
| MPa to psi | × 145.037738 | psi = MPa × 145.037738 |
| Pa to kPa | ÷ 1,000 | kPa = Pa ÷ 1,000 |
| Pa to psi | × 0.000145037738 | psi = Pa × 0.000145037738 |
| psi to bar | × 0.068947573 | bar = psi × 0.068947573 |
| psi to mmHg | × 51.714933 | mmHg = psi × 51.714933 |
| psia to psig | minus atmosphere | psig = psia – atmospheric pressure |
| psig to psia | plus atmosphere | psia = psig + atmospheric pressure |
Typical Use Cases
Frequently Asked Questions
Q: What does PSF to TSF help me compare?
A: Convert pressure values when a gauge, datasheet, and worksheet all use different scales.
Q: What is a quick checkpoint for PSF to TSF?
A: 1 pounds per square foot equals 0.0005 tons per square foot.
Q: Why does the number change so much after converting?
A: Engineering units can be scaled very differently even when they describe the same quantity, so the numeric value often shifts a lot.
Q: When should I keep the source unit?
A: Keep it when the current tool, instrument, or specification already expects that unit. Convert only when the receiving context needs another one.
Q: How do I reverse PSF to TSF?
A: psf = tsf × 2,000. Use the reverse relationship whenever the starting value is already in the target unit.
Q: Should I treat this as exact or approximate?
A: The calculation uses an exact factor.